Teknik & Rekayasa editorial
Open AccessOA2022
A Thermo-Mechanical Phase-Field Fracture Model: Application to Hot Cracking Simulations in Additive Manufacturing
This study presents a thermo-mechanical phase-field fracture model to simulate hot cracking in additive manufacturing, showing that solidification shrinkage drives circumferential cracks while temperature gradients cause central cracks. Process parameters like laser power and scanning speed significantly influence cracking modes.
Huiting Ruan; S. Rezaei; Yangyiwei Yang; D. Gross; Bai-Xiang Xu· Journal of the mechanics and physics of solids· 2022· DOI 10.1016/j.jmps.2022.105169
The core problem
Thermal fracture is a prevalent issue in many engineering applications and is one of the most devastating defects in metal additive manufacturing (AM). The interactive underlying physics—such as rapid heating, melting, solidification, and thermal stresses—make computational simulation of hot cracking challenging. This work proposes a thermo-mechanical phase-field fracture model based on a thermodynamically consistent derivation to address this challenge. The model aims to capture the coupled effects of damage on thermomechanics and heat conduction, temperature-dependent fracture properties, and different phase-field formulations. The ultimate goal is to apply the model to simulate hot cracking in AM, considering both thermal strain and solidification shrinkage, and to investigate the influence of process parameters on cracking patterns.
Innovation
The model is derived from a thermodynamically consistent framework, incorporating a phase-field approach for fracture. The coupling terms include damage-informed thermomechanics (where damage affects mechanical behavior and heat conduction) and temperature-dependent fracture properties. The phase-field fracture formulation is chosen to account for the brittle fracture behavior typical of hot cracking. The model is implemented using the finite element method. For thermal history, various predicted thermal profiles are considered: an analytical solution and a numerical thermal temperature profile around the melting pool that includes the influence of different process parameters. The numerical thermal profile accounts for the effects of laser power and scanning speed. The model incorporates both thermal strain and solidification shrinkage strain, which are critical for accurately predicting hot cracking during the solidification process.
Introduction
Thermal fracture is a prevalent issue in many engineering applications and is one of the most devastating defects in metal additive manufacturing (AM). The interactive underlying physics—such as rapid heating, melting, solidification, and thermal stresses—make computational simulation of hot cracking challenging. This work proposes a thermo-mechanical phase-field fracture model based on a thermodynamically consistent derivation to address this challenge. The model aims to capture the coupled effects of damage on thermomechanics and heat conduction, temperature-dependent fracture properties, and different phase-field formulations. The ultimate goal is to apply the model to simulate hot cracking in AM, considering both thermal strain and solidification shrinkage, and to investigate the influence of process parameters on cracking patterns.
Why it matters
The study provides insights into the mechanisms of hot cracking in additive manufacturing. The dominant role of solidification shrinkage in circumferential cracks suggests that controlling solidification conditions is crucial for mitigating such defects. The temperature gradient's role in central cracks indicates that thermal management during the process is also critical. The process parameter study shows that the cracking mode can be controlled by adjusting laser power and scanning speed: keyhole mode cracking is associated with higher energy input, while conduction mode cracking occurs at lower energy input. The good agreement with experimental observations demonstrates the model's predictive capability. The model's thermodynamically consistent derivation and inclusion of coupled effects make it a valuable tool for further studies on hot cracking and other thermal fracture problems in AM.
Who should read this
Pembaca Research Digest dan praktisi rumpun ini.
Opening member content…