Teknik & Rekayasa editorial
Open AccessOA2026
Design, Fabrication, and Performance Evaluation of An Automated Reciprocating Sand Filtration System for Sustainable Construction Engineering
This study presents the design, fabrication, and field testing of an automated reciprocating sand filtration machine that uses a crank-rocker mechanism and inclined mesh to remove oversized particulates from construction sand, improving uniformity and reducing cycle time.
Patel Soham; T. Aryan; V. Rohit; Vaghari Samir; Vaghela Sahil; Patel Jaiminยท International Journal of Creative and Open Research in Engineering and Managementยท 2026ยท DOI 10.55041/ijcope.v2i5.665
The core problem
In civil engineering, the physical properties of raw materials directly govern the structural integrity and longevity of constructed facilities. Fine aggregate sand is a foundational component in concrete, mortar, and plaster. However, sand from riverbeds and quarries often contains oversized particulates such as pebbles, gravel, and organic debris. These inclusions act as stress concentrators and moisture traps in cured concrete, compromising structural viability. Traditional manual mesh-sifting methods are time-consuming and labor-intensive. To address these issues, this study designs, models, fabricates, and empirically tests an automated, electrically driven reciprocating sand filtration machine. The goal is to enhance sand uniformity, reduce cycle time, and align with eco-friendly design criteria.
Innovation
The mechanical architecture is based on an integrated crank-rocker linkage that converts rotary input into single-axis linear translation of an inclined screening mesh. The mesh is set at an optimal slope angle of 10 degrees. The system is powered by a direct-current motor coupled with an electronic pulse-width modulation (PWM) speed controller, enabling adjustable stroke rates. The design process included kinematic modeling, structural fabrication, and field testing. Performance was evaluated by measuring output sand uniformity, throughput, and cycle time under various operating conditions. The prototype was constructed using locally available materials, emphasizing sustainability and cost-effectiveness.
Introduction
In civil engineering, the physical properties of raw materials directly govern the structural integrity and longevity of constructed facilities. Fine aggregate sand is a foundational component in concrete, mortar, and plaster. However, sand from riverbeds and quarries often contains oversized particulates such as pebbles, gravel, and organic debris. These inclusions act as stress concentrators and moisture traps in cured concrete, compromising structural viability. Traditional manual mesh-sifting methods are time-consuming and labor-intensive. To address these issues, this study designs, models, fabricates, and empirically tests an automated, electrically driven reciprocating sand filtration machine. The goal is to enhance sand uniformity, reduce cycle time, and align with eco-friendly design criteria.
Why it matters
The results indicate that the automated reciprocating sand filtration system offers a viable alternative to traditional manual sieving. The crank-rocker mechanism proved reliable in converting rotary motion to linear reciprocation, ensuring consistent screening action. The 10-degree slope angle was found to be optimal for balancing throughput and separation efficiency. The use of a DC motor with PWM control provided flexibility and energy efficiency. The system's eco-friendly design criteria were met through the use of sustainable materials and reduced labor. However, further optimization may be needed to scale the prototype for industrial applications. Future work could explore automation of feed mechanisms and integration with other construction processes.
Who should read this
Pembaca Research Digest dan praktisi rumpun ini.
Opening member contentโฆ