Jadwal Sholat

Memuat jadwal sholat…

Teknik & Rekayasa editorial

Open AccessOA2026

Graphene-Skinned Fiber with Fine-Tunable Electrical Resistance via Radical and Substrate Engineering for Electromagnetic-Thermal Fabric

A synergistic strategy combining radical manipulation and substrate engineering during chemical vapor deposition enables fine-tuning of graphene sheet resistance from 26 to 150 Ω sq−1 on SiO2 fabric. Laser-patterned frequency selective surfaces and sandwich structures achieve broadband electromagnetic wave transmission (7.29 GHz) and effective Joule heating (72 °C), overcoming the conductivity-transparency trade-off.
Jie Liang; Zhaochen Li; Fang Ye; Yu-Chen Cao; Yi An; Xiao-Meng Fan; Qiang Song· Nano-Micro Letters· 2026· DOI 10.1007/s40820-026-02117-8

The core problem

The integration of electromagnetic (EM) communication and electrothermal deicing functionalities into wearable and aerospace materials demands multifunctional fabrics that can simultaneously transmit EM waves and generate heat. Graphene-skinned fibers offer a promising platform due to their excellent electrical, thermal, and mechanical properties. However, a longstanding challenge is the trade-off between electrical conductivity and EM wave transparency: high conductivity improves Joule heating but often impedes EM wave transmission. This work addresses this trade-off by developing a multiscale engineering approach that coordinates microscopic structural regulation of graphene with macroscopic patterning of the fabric. The authors demonstrate a radical-manipulation strategy for synthesizing graphene (Gr)-skinned SiO2 fabric via low-pressure chemical vapor deposition (CVD) using methanol precursor, enabling fine control over graphene microstructure and sheet resistance.

Innovation

The synthesis of Gr-skinned SiO2 fabric was performed using low-pressure CVD with methanol as the carbon precursor. The composition of C1, C2, and C6 radicals was strategically regulated by temperature, which dictated the growth of either defective or highly textured graphene microstructures. Substrate effects were investigated to understand bilayer evolution: SiO2 imposed lower adsorption energy of C1 and higher diffusion barriers of radicals compared to graphene, promoting edge defects in subsurface G1-type graphene layers. In contrast, reduced substrate constraints facilitated low-defect G2-type graphene growth on top of G1-type graphene. This synergistic control of gas-phase kinetics and substrate dynamics enabled fine-tunable sheet resistance from 26 to 150 Ω sq−1. To achieve EM wave transparency while maintaining Joule heating, laser-etched band-pass frequency selective surface (FSS) structures were fabricated on the Gr-skinned fabric. A sandwich structure was prepared by laminating the Gr-skinned fabric with EM wave transparent sheets exhibiting voltage-dependent transmittance.
Introduction
The integration of electromagnetic (EM) communication and electrothermal deicing functionalities into wearable and aerospace materials demands multifunctional fabrics that can simultaneously transmit EM waves and generate heat. Graphene-skinned fibers offer a promising platform due to their excellent electrical, thermal, and mechanical properties. However, a longstanding challenge is the trade-off between electrical conductivity and EM wave transparency: high conductivity improves Joule heating but often impedes EM wave transmission. This work addresses this trade-off by developing a multiscale engineering approach that coordinates microscopic structural regulation of graphene with macroscopic patterning of the fabric. The authors demonstrate a radical-manipulation strategy for synthesizing graphene (Gr)-skinned SiO2 fabric via low-pressure chemical vapor deposition (CVD) using methanol precursor, enabling fine control over graphene microstructure and sheet resistance.

Why it matters

The results demonstrate that precise control over graphene microstructure via radical and substrate engineering can effectively mitigate the conductivity-EMW transparency trade-off in graphene-functionalized fibers. The ability to fine-tune sheet resistance by regulating C1/C2/C6 radical ratios and substrate interactions provides a versatile platform for designing multifunctional composites. The laser-patterned FSS and sandwich structure enable broadband EM wave transmission while maintaining efficient Joule heating, making the material suitable for applications in 5G/6G wearables, aerospace radomes, and smart composites. This work establishes a radical-manipulation strategy that coordinates microscopic structural regulation with macroscopic patterning, unlocking next-generation smart composites for integrated electromagnetic-thermal management systems.

Who should read this

Pembaca Research Digest dan praktisi rumpun ini.

Opening member content…