Teknik & Rekayasa editorial
Open AccessOA2022
Mechanical Behavior of Aluminum and Graphene Nanopowder-Based Composites
This study investigates the fabrication and mechanical characterization of Al7075 composites reinforced with graphene nanoparticles, fabricated at various semisolid temperatures with and without stirring. Results show that stirring improves mechanical properties, while increasing temperature reduces tensile strength, hardness, and compression strength.
K. Sekhar; Raviteja Surakasi; P. Roy; P. J. Rosy; T. Sreeja; S. Raja; Velivela Lakshmikanth Chowdary· International Journal of Chemical Engineering· 2022· DOI 10.1155/2022/2224482
The core problem
The demand for high-quality, durable engineering materials is increasing in today's technologically advanced world. Aluminum-7075 alloy is widely used in transportation applications such as aerospace, marine, and vehicle production due to its excellent mechanical properties and low density. This study addresses the fabrication and characterization of Al7075 semisolid metal matrix composites (MMCs) reinforced with graphene nanoparticles. The objective is to evaluate how the addition of graphene and the processing temperature affect the mechanical behavior of the composite.
Innovation
Samples were prepared with and without stirring graphene in aluminum-7075 at various temperatures: 800°C, 830°C, 860°C, 890°C, and 920°C. At these temperatures, the material is in a semisolid state, allowing graphene to be introduced and stirred into the molten liquid. The specimens were fabricated according to American Society for Testing and Materials (ASTM) standards. Mechanical properties—hardness, tensile strength, impact strength, and compression strength—were evaluated and compared. Microstructural examination was performed using a scanning electron microscope (SEM). Additionally, specimens were analyzed using ANSYS simulation software.
Introduction
The demand for high-quality, durable engineering materials is increasing in today's technologically advanced world. Aluminum-7075 alloy is widely used in transportation applications such as aerospace, marine, and vehicle production due to its excellent mechanical properties and low density. This study addresses the fabrication and characterization of Al7075 semisolid metal matrix composites (MMCs) reinforced with graphene nanoparticles. The objective is to evaluate how the addition of graphene and the processing temperature affect the mechanical behavior of the composite.
Why it matters
The improvement in mechanical properties with stirring can be attributed to the better dispersion of graphene nanoparticles in the semisolid melt, leading to more uniform reinforcement. The reduction in strength at higher temperatures is likely due to increased porosity and grain growth, which weaken the composite. The ANSYS simulations provided additional insights into the stress distribution and validated the experimental findings. Overall, the study demonstrates that graphene-reinforced Al7075 composites, when properly processed with stirring at optimal temperatures, can achieve enhanced mechanical properties suitable for demanding engineering applications.
Who should read this
Pembaca Research Digest dan praktisi rumpun ini.
Opening member content…