Teknik & Rekayasa editorial
Open AccessOA2022
Mechanical Performance of Additively Manufactured Cobalt-Chromium-Molybdenum Auxetic Meta-Biomaterial Bone Scaffolds
This study develops and characterizes five additively manufactured CoCrMo auxetic meta-biomaterial scaffolds, achieving negative Poisson's ratios from -0.1 to -0.24 at 73-82% porosity. The most auxetic architecture (AX1) also exhibited the highest elastic modulus (1.66 GPa), yield strength (56 MPa), and ultimate strength (158 MPa), with architecture primarily governing mechanical performance.
Chameekara T. Wanniarachchi; A. Arjunan; A. Baroutaji; Manpreet Singhยท Journal of The Mechanical Behavior of Biomedical Materialsยท 2022ยท DOI 10.1016/j.jmbbm.2022.105409
The core problem
Auxetic meta-biomaterials exhibit a negative Poisson's ratio (), leading to unconventional deformation modes and mechanical properties distinct from traditional cellular biomaterials. This behavior can be advantageous for load-bearing tissue engineering constructs such as bone scaffolds, where early studies suggest that auxetic architectures may enhance cell proliferation and tissue reintegration. However, research on CoCrMo auxetic meta-biomaterials for bone scaffolds or implants remains unreported. This paper proposes a framework for developing auxetic meta-biomaterials that can be printed on demand while meeting porosity requirements suitable for load-bearing bone scaffolds. The study evaluates five CoCrMo auxetic meta-biomaterial scaffolds under two scenarios targeting near-zero and high negative Poisson's ratio, using Ashby's criterion and prototype testing under uniaxial compression to assess mechanical performance and failure modes. A multi-criteria decision-making procedure combining Analytic Hierarchy Process (AHP) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) identifies the best-performing architectures.
Innovation
Five CoCrMo auxetic meta-biomaterial scaffold architectures were designed and additively manufactured. The scaffolds were characterized under two scenarios: one aiming for near-zero Poisson's ratio and another for high negative Poisson's ratio. Mechanical performance was evaluated using Ashby's criterion followed by uniaxial compression testing of prototypes to determine elastic modulus, yield strength, ultimate strength, and failure modes. Porosity and Poisson's ratio were measured. A multi-criteria decision-making framework integrating AHP and TOPSIS was employed to rank the scaffolds based on performance criteria. The AHP was used to determine criteria weights, and TOPSIS ranked the alternatives by similarity to the ideal solution. The study also analyzed the influence of meta-cellular architecture and relative density on mechanical properties.
Introduction
Auxetic meta-biomaterials exhibit a negative Poisson's ratio (), leading to unconventional deformation modes and mechanical properties distinct from traditional cellular biomaterials. This behavior can be advantageous for load-bearing tissue engineering constructs such as bone scaffolds, where early studies suggest that auxetic architectures may enhance cell proliferation and tissue reintegration. However, research on CoCrMo auxetic meta-biomaterials for bone scaffolds or implants remains unreported. This paper proposes a framework for developing auxetic meta-biomaterials that can be printed on demand while meeting porosity requirements suitable for load-bearing bone scaffolds. The study evaluates five CoCrMo auxetic meta-biomaterial scaffolds under two scenarios targeting near-zero and high negative Poisson's ratio, using Ashby's criterion and prototype testing under uniaxial compression to assess mechanical performance and failure modes. A multi-criteria decision-making procedure combining Analytic Hierarchy Process (AHP) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) identifies the best-performing architectures.
Why it matters
The findings demonstrate that auxetic CoCrMo meta-biomaterials can be designed with negative Poisson's ratios suitable for load-bearing bone scaffolds while maintaining porosity in the range of 73-82%. The superior mechanical performance of the AX1 architecture, which exhibited both the highest auxeticity and the highest strength and modulus, suggests that auxeticity and load-bearing capacity can be concurrently achieved through careful architectural design. The dominance of meta-cellular architecture over relative density in determining mechanical properties provides a design lever for tailoring scaffolds. The proposed framework enables on-demand printing of auxetic meta-biomaterials with porosity requirements for bone scaffolds. The integration of Ashby's criterion, prototype testing, and AHP-TOPSIS provides a systematic approach for selecting optimal architectures. These results support the potential of auxetic meta-biomaterials for load-bearing tissue engineering applications, though further in vitro and in vivo studies are needed to validate biological performance.
Who should read this
Pembaca Research Digest dan praktisi rumpun ini.
Opening member contentโฆ