Teknik & Rekayasa editorial
Open AccessOA2023
Printing tissue-engineered scaffolds made of polycaprolactone and nano-hydroxyapatite with mechanical properties appropriate for trabecular bone substitutes
This study investigates how porosity and internal structure affect the mechanical properties of 3D-printed PCL/30% nHAp scaffolds, identifying lattice and staggered designs with moduli and yield strengths comparable to trabecular bone.
Zahra Yazdanpanah; N. Sharma; Alice Raquin; D. Cooper; Xiong-Biao Chen; J. Johnstonยท BioMedical Engineering OnLineยท 2023ยท DOI 10.1186/s12938-023-01135-6
The core problem
Bone tissue engineering using three-dimensional (3D) printing technology has emerged as a promising approach to treat bone defects using scaffolds. The objective of this study was to investigate the influence of porosity and internal structure on the mechanical properties of scaffolds designed to replicate trabecular bone. The authors fabricated composite scaffolds from polycaprolactone (PCL) reinforced with 30% (wt.) nano-hydroxyapatite (nHAp) by extrusion printing. Scaffolds with various porosities were designed and fabricated with and without an interlayer offset, termed as staggered and lattice structure, respectively. The study aims to provide insights into how scaffold design parameters can be tuned to achieve mechanical properties suitable for trabecular bone substitution.
Innovation
Composite scaffolds of PCL with 30% (wt.) nHAp were fabricated using extrusion printing. Two internal architectures were created: a lattice structure (without interlayer offset) and a staggered structure (with interlayer offset). Scaffolds were designed with various porosities. Mechanical compressive testing was performed to determine the elastic modulus and yield strength of the scaffolds. Linear regression analysis was used to evaluate the relationship between mechanical properties and scaffold porosity. The study focused on comparing the mechanical performance of the two structures across different porosity levels.
Introduction
Bone tissue engineering using three-dimensional (3D) printing technology has emerged as a promising approach to treat bone defects using scaffolds. The objective of this study was to investigate the influence of porosity and internal structure on the mechanical properties of scaffolds designed to replicate trabecular bone. The authors fabricated composite scaffolds from polycaprolactone (PCL) reinforced with 30% (wt.) nano-hydroxyapatite (nHAp) by extrusion printing. Scaffolds with various porosities were designed and fabricated with and without an interlayer offset, termed as staggered and lattice structure, respectively. The study aims to provide insights into how scaffold design parameters can be tuned to achieve mechanical properties suitable for trabecular bone substitution.
Why it matters
The study demonstrates that scaffolds printed from PCL/30% (wt.) nHAp with lattice and staggered structures offer promise for treating trabecular bone defects. The findings highlight the significant effect of porosity and internal structure on scaffold mechanical properties. The intersection point at 55% porosity suggests a design threshold where the lattice structure becomes more advantageous for elastic modulus. The lattice structure's consistently higher yield strength across all porosities indicates its potential superiority for load-bearing applications. These results provide valuable guidance for developing scaffolds with mechanical properties tailored for trabecular bone substitution. The authors suggest that both structures can be optimized by adjusting porosity to match the mechanical requirements of specific bone defects.
Who should read this
Pembaca Research Digest dan praktisi rumpun ini.
Opening member contentโฆ